Home › Bollards and Physical Barriers
We install bollards and physical barriers in Mobile, AL to protect storefronts, loading docks, utilities, and pedestrian areas from vehicle impact. Options include steel pipe bollards, decorative covers, and barrier rails designed around your site layout.
Legendary Fence Company Mobile provides professional bollard installation throughout Mobile, AL, Alabama and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 251-651-1614 or request your free quote.
Practical bollard solutions for Mobile, AL properties
If you manage a property in Mobile, AL, you already know how often vehicles end up where they do not belong. Tight parking lots, busy loading areas, and soft coastal soil all increase the risk of cars bumping into buildings, gas meters, storefront glass, and pedestrian walkways. Legendary Fence Company Mobile installs bollards and physical barriers that are designed around those real, local problems, not just what looks good on a drawing.
We start by walking your site with you. We look at how vehicles actually move, how customers and employees walk, and where your highest impact risks are. For example, at a Dauphin Street storefront we may focus on protecting glass and entry doors from curbside parking. At an industrial site near the port we pay closer attention to truck turning paths, trailer overhangs, and heavy axle loads.
Our bollard installation work covers steel pipe bollards filled with concrete, removable and lockable bollards for controlled access, heavy duty crash rated barriers for high‑risk zones, and low profile wheel stops where full posts are not practical. We also install guardrail style barriers and welded steel barrier rails inside warehouses and distribution centers. Every job is tailored to your pavement type, soil conditions, and traffic patterns in Mobile.
Types of bollards and barriers we install
Legendary Fence Company Mobile focuses on solutions that match how your property is used day to day. Common bollard and barrier options include:
• Fixed steel pipe bollards: Typically schedule 40 or schedule 80 steel pipe, set in concrete footings. These are ideal for protecting building corners, overhead door tracks, gas lines, electrical equipment, and storefronts. We cut posts to a height that works with your curb and slope, usually 36 to 48 inches above finished grade.
• Removable or lockable bollards: Used where you sometimes need to block vehicles but still allow emergency or delivery access. We core drill a steel sleeve into the existing concrete, set it in epoxy and grout, then the bollard locks into that sleeve. This works well for event spaces in downtown Mobile, shared alleys, and access roads that must stay clear most of the time.
• Decorative and architectural bollards: In historic or higher end areas we can add sleeves or covers over structural posts. Options include powder‑coated steel, aluminum, or composite sleeves that give a finished look while the inner steel pipe carries the impact load. This is common for medical offices, churches, and coastal condos that must look good and still be safe.
• Barrier rails and guardrail: Where continuous protection is needed, such as along loading docks or around generator yards, we install steel barrier rail systems or W‑beam style guardrail anchored to posts. These systems spread impact loads and are useful in large parking areas and warehouse interiors.
We help you pick the right mix. For example, a shopping center might combine fixed bollards at the storefront, wheel stops at front‑row parking, and barrier rail along service drives, all designed and installed as one coordinated system.
How our bollard installation process works
Effective bollard installation in Mobile is more than drilling a hole and pouring some concrete. Legendary Fence Company Mobile follows a step‑by‑step process so your bollards actually stop vehicles and stay straight in local conditions.
1. Site assessment and layout: We verify where utilities run, measure pavement thickness, note drainage flow, and mark exact post locations with paint. In flood‑prone parts of Mobile we are careful not to block drainage or trap debris.
2. Locating utilities: Before any digging or coring, we call 811 and, when needed, bring in private utility locating. This protects gas service, water lines, electrical feeds, and communications that are common under commercial parking lots and sidewalks.
3. Drilling or excavation: In existing concrete, we typically core drill holes to the diameter and depth needed for the bollard. In asphalt, we sawcut a clean square or circle, remove the pavement, and dig to the required depth. For high impact posts we often go 36 inches deep or more, adjusting based on soil stability.
4. Setting posts and reinforcing: We position the steel bollard pipe in the hole with internal bracing or temporary jigs so it stays plumb. Where higher impact resistance is needed, we may add reinforcing steel inside the footing, tie it to adjacent slabs, or enlarge the base diameter.
5. Concrete placement and finishing: We pour high‑strength concrete, vibrate or rod it to remove air pockets, then shape the top for water runoff. In hot coastal weather we pay attention to curing so the concrete does not crack early. For traffic areas, we barricade fresh work until it reaches adequate strength.
6. Coating and striping: After the posts and concrete cure, we clean the surface, apply rust‑inhibiting primer if needed, then finish coats. Common finishes are safety yellow or custom colors. We can add reflective tape, decals, or coordinate with your parking lot striping so bollards are clearly visible day and night.
Throughout the process, our crew keeps access open as much as possible. On active sites, we often schedule noisy coring and cutting early or late in the day so your operations are not disrupted.
What affects cost and performance in Mobile, Alabama
Two bollards that look similar from the street can behave very differently in a real impact. Legendary Fence Company Mobile spends time on the details that affect both cost and performance, and we will walk you through each factor before you commit.
Key cost drivers include:
• Pavement and subgrade: Coring through thick, reinforced concrete costs more than setting posts in new, open excavation. Soft or saturated soils in parts of Mobile may require deeper or larger footings to keep bollards from leaning over time.
• Impact rating needs: A simple parking control bollard that only needs to discourage vehicles is different from a security bollard that must stop a moving truck. Higher protection means heavier pipe, deeper foundations, or engineered crash‑rated systems, which increase both material and labor costs.
• Quantity and layout complexity: Straight lines along a curb are faster to install than custom patterns around landscaping, curves, or tight spaces near building columns. The more layout work and hand excavation required, the more the project will cost.
• Coatings and covers: Basic painted steel is economical but needs periodic maintenance in coastal air. Powder coating, galvanized posts, and decorative sleeves cost more up front but reduce repainting and rust issues.
We also talk frankly about common local problems. In Mobile, standing water and high humidity can cause rust at the base of bollards if drains or slopes are ignored. We mitigate this with proper grading around the footing, sealed post caps, and coating systems that tolerate coastal conditions. In busy parking lots, poorly placed bollards can encourage drivers to clip them when turning. We check turning radii and truck paths so posts protect what they should without becoming a hazard themselves.
Instead of overselling the heaviest option, we match the specification to your risk level and budget, then document what your chosen design is expected to handle.
What to know before you hire a bollard contractor
Before you hire anyone for bollard installation in Mobile, AL, there are a few smart questions to ask so you get a system that actually works for your site.
• Ask about footing depth and design: A contractor should be able to tell you, in writing, how deep and wide the footings will be and whether they are using concrete fill or just tamped backfill. Shallow or poorly compacted posts are more likely to lean after a few years of vehicle bumps and soft ground.
• Confirm local code and access compliance: For commercial properties, bollards must not block required egress routes or reduce accessible paths below code. At Legendary Fence Company Mobile we lay out posts so they protect doors and ramps without violating ADA or fire access requirements. We can coordinate with your architect or fire marshal if needed.
• Verify corrosion protection: Ask how the posts will be primed, painted, or galvanized, and what warranty is offered. In our climate, unprotected steel right at ground level will rust faster than you expect.
• Check cleanup and patching: Good installation includes proper patching of nearby slab edges, sawcut joints, and any asphalt that had to be removed. We broom clean the area, remove slurry from coring, and make sure there are no trip hazards left behind.
When you work with Legendary Fence Company Mobile, you get a local crew that has installed bollards and physical barriers at retail centers, industrial yards, schools, and churches across the Mobile area. We understand how Gulf Coast weather, coastal air, and local traffic patterns affect these systems over time, and we stand behind both our materials and our workmanship.
If you are planning a new project or need to correct a problem area where vehicles keep getting too close, we can visit your site, provide layout suggestions, and give you a clear, line‑item proposal so you know exactly what you are paying for and what level of protection you are getting.
